MS 64 7° Angled Truck TPMS Valve - T02

MS 64 7° Angled Truck TPMS Valve

Screw-mounted valve for TPMS sensors in commercial vehicles

The 64MS 7° angled truck valve is designed for wheels of vehicles equipped with a direct TPMS tire pressure monitoring system. It is suitable for trucks, buses, trailers and semi-trailers where a durable, airtight and service-resistant connection between the valve, rim and TPMS sensor is required.

The valve is intended for rims with a valve hole diameter of 9.7 mm (+0.3 mm). The valve base angle is 7°, which helps position the valve correctly in relation to the rim and improves access to the valve end during pressure checks or inflation.

Brass body with nickel-plated coating

The valve body is made of brass and coated with a nickel layer. The nickel-plated surface increases resistance to corrosion, moisture and road contamination, while also protecting the contact area between the valve and the rim. This is particularly important in commercial vehicles operating under variable road conditions and heavy loads.

Screw-mounted design – no bonding required

The 64MS valve features a screw-mounted design and does not require bonding. The connection to the rim is made mechanically using a nut, seals and the correct tightening torque. This solution makes installation, servicing and possible replacement easier.

TPMS sensor compatibility

A M6 Torx TX20 screw with washer is provided for mounting the TPMS sensor. The valve is compatible with the CUB TPMS Truck 2.0 Uni-Sensor. It may also be suitable for other TPMS sensors mounted in the same way, provided they meet the design requirements of the valve and rim.

Valve components

The valve consists of:

• profiled valve stem,

• valve nut for 16 mm wrench,

• rubber seals,

• valve core,

• metal cap with seal,

• M6 Torx TX20 screw with washer for TPMS sensor mounting.

Application

The 64MS 7° valve is intended for installation in truck rims with a direct TPMS system. It can be used when replacing a damaged valve, installing a new TPMS sensor or preparing an additional wheel set.

Thanks to its metal construction, nickel-plated surface and screw-mounted connection, the valve ensures durable installation, good sealing performance and high resistance to operating conditions typical for commercial vehicles.