MS 58 45° Angled Truck TPMS Valve - T01

MS 58 45° Angled Truck TPMS Valve – ETRTO V3.22.1

Screw-mounted valve for TPMS sensors in commercial vehicles

The 58MS 45° angled truck valve is designed for wheels of vehicles equipped with a direct TPMS tire pressure monitoring system. It is suitable for trucks, buses, trailers and semi-trailers where a durable, airtight and service-resistant connection between the valve, rim and TPMS sensor is required.

The valve is intended for rims with a valve hole diameter of 9.7 mm (+0.3 mm). The valve base angle is 45°, which helps adapt the valve position to the rim design and improves access to the valve end during pressure checks or inflation.

Brass construction

The valve body is made of brass, a material commonly used in truck valves due to its good mechanical strength, pressure resistance and durability in everyday operation. The metal construction ensures stable seating of the valve in the rim and reliable performance under conditions typical for commercial vehicles.

Screw-mounted design – no bonding required

The 58MS valve features a screw-mounted design and does not require bonding. The connection to the rim is made mechanically using a nut, seals and the correct tightening torque. This solution makes installation, servicing and possible replacement easier.

TPMS sensor compatibility

A M6 Torx TX20 screw with washer is provided for mounting the TPMS sensor. The valve is compatible with the CUB TPMS Truck 2.0 Uni-Sensor. It may also be suitable for other TPMS sensors mounted in the same way, provided they meet the design requirements of the valve and rim.

Valve components

The valve consists of:

• profiled valve stem,

• valve nut for 14 mm wrench,

• rubber seals,

• valve core,

• metal cap with seal,

• M6 Torx TX20 screw with washer for TPMS sensor mounting.

Application

The 58MS 45° valve is intended for installation in truck rims with a direct TPMS system. It can be used when replacing a damaged valve, installing a new TPMS sensor or preparing an additional wheel set.

Thanks to its brass construction, screw-mounted connection and angled profile, the valve ensures durable installation, good sealing performance and high resistance to operating conditions typical for commercial vehicles.