| Air connection: | 3/4" |
| Maximum inlet pressure: | 16bar |
| Throughput at 10 bar: | 3400 l/min |
| Output pressure adjustment range: | 0,5 - 12 bar |
| Filter: | 40 microns |
| Temperature range: | 0 - 60°C |
| Code: | OFR-3/4-MIDI |
| Amount: | 1 pcs. |
| Condition: | new |
| Safety information: | no data |
MIDI 3/4 filterreducer with pressure gauge - RQS
Professional filterreducer of the RQS brand. When used in a pneumatic system, it performs the following functions:
- FILTER - purification of air from oil, condensate and solid particles,
- REDUCTOR - setting and maintaining a constant value of output pressure.
The filter module is equipped with a 40 μm filter insert. Condensate is deposited in a screw-on container with a manual drain. When the container is full (to a level of about 10 mm below the filter element), remove the condensate by opening the drain valve.
The measuring range of the pressure gauge is 0 - 16 bar. The dial is calibrated in bar with a graduation of 0.2 bar accuracy. The pressure gauge can be installed to the port on the filterreducer housing - you can choose between two pressure gauge connections : front or rear. When not in use, the port should be plugged with the supplied plug.
Pressure adjustment is done with a large, convenient knob on the top of the unit. The knob has a lock to prevent unintentional changes in the setting - before adjusting it, it must be unlocked by pulling upward.
A rear mounting bra cket with screws is supplied with the filterreducer.
